controller panel manufacturer in India
+91-9811079661 01244318826

Automatic Power Factor controller

ELDEE manufacture’S APFC Panels of capacity upto 20 - 1000 KVAR or as per customer's requirement conforming to IS:13585 Part-I/1994

Most of the commercial and industrial installations in the country have large electrical loads which are mostly inductive in nature. Such loads like motors, big machines, air conditioners, drives, etc. result in a severely lagging power factor. This means loss and wastage of energy and heavy penalties by electricity boards. In case of fixed loads this can be taken care by manual switching of capacitors.

However, in case of rapidly varying and scattered loads it becomes difficult to maintain a high power factor by manually switching on/off capacitors in proportion to variation of load within an installation. This drawback is overcome by using an APFC Panel which not only maintains a high power factor but also eliminates the need for constant manual intervention.

  • Designed with the concept of modularity which allows upgrading of KVAR rating as when required
  • Incomer ACB / MCCB for connection to the mains
  • Advanced microprocessor based relay used to ensure real time power factor correction in the installation
  • Current limiting contractors specially designed for capacitor switch (Optional)
  • Specifically designed, user friendly and dust & vermin proof modules
  • Flush mounted meters to indicate line voltage & current rovision of incomer cable from top and bottom
  • Efficient performance trans air exhaust fan for cooling
  • Low loss single/three phase MPP capacitors housed in aluminum cans
  • Also low loss three phase APP capacitors housed in CRCA cans (Optional)
  • Heavy Duty capacitors for jerking loads
  • Economical with faster payback periods
  • Ability to maintain a constant high power factor
  • Eliminates low power factor penalties levied by Electricity Board
  • Reduces the KVA demand charges
  • Improves efficiency of the system by reducing losses
  • Prevents leading power factor in the installation during low load conditions
  • Rated Capacity
  • Reference Standard
  • PF Controller
  • Rated Voltage
  • Auxiliary Voltage
  • Frequency
  • Temperature range
  • Cooling

Dealer Form

  • Degree of Protection
  • Capacitors
  • Capacitance Tolerance
  • Dielectric Losses
  • Switching
  • Configuration
  • Structure
  • Wiring
  • Up to 2000 KVAR
  • IS 13585 (Part-I)/1994
  • Intelligent Microprocessor Controller based APFC Relay
  • 415/440 V, 3-phase
  • 230V AC
  • 50 Hz. +/- 3
  • -10 °C to 50 °C
  • Exhaust Fans (where required)
  • IP 45 or as per customer's requirement
  • Self-Healing Metallized Polypropylene equipped with Pressure Safety Device 7 discharge Resistor
  • Filling is Bio-Degradable, Non-Toxic, Dry Type & PCB Free
  • -5% to +10%
  • < 0.2W/KVAR
  • Each bank of capacitors is controlled by a 3-pole contactor
  • Delta / Star Floating / Star Grounding
  • High Quality CRCA Steel Sheet, protected against corrosion, Powder Coated
  • Fire retardant copper wire/cables

GET A QUOTE

CLIENTS

News

Pages